广州伟伯科技有限公司
您的位置:首页 > 产品中心 > OMI® 管固定装置
产品搜索:

OMI® 管固定装置

OMI® Tube Holder
产品编号:3449491
规格:for use with OMI-2 purifier tubes
包装规格:1 EA
产品类别:进口试剂
品牌:Supelco
优惠价:立即咨询
产品价格
产品编号包装单位单价(元)国内现货国外库存询价单
34494911 EA3120
产品别名

OMI® 管固定装置

OMI® Tube Holder

OMI-2 TUBE HOLDER

OMI-2 管固定装置

产品性质
compatibility【相容性】
for use with OMI-2 purifier tubes
基本信息
General description【一般描述】
OMI® Tube Holder holds the OMI® purifier tube which simultaneously removes oxygen, water vapor, CO, CO2, most sulfur compounds, most halogen compounds, alcohols, phenols to less than 10ppb. It also purifies helium, hydrogen, nitrogen, argon and methane. Color change indicates purifier exhaustion. Glass body does not diffuse air or off-gas. Furthermore, it is ideal for Hall, ECD and GC/MS detection systems. OMI®-4 purifier protects multiple instruments (three times the capacity of OMI®-2 tubes).
The OMI is a polishing purifier that removes many contaminants that other upstream purifiers miss. It will simultaneously and irreversibly remove moisture, oxygen, carbon monoxide, carbon dioxide, most sulfur compounds, most halogen compounds, alcohols, and phenols to less than 10 ppb. It is recommended that an OMI be installed in carrier gas streams just upstream of every GC. It consists of two components:
  • A re-useable tube holder that is installed into the gas delivery system. The use of polycarbonate provides see-through capability along with safety.
  • A purifier tube containing an indicating resin (changes color from black to brown when exposed to as little as 1 ppm of moisture or oxygen). The use of glass provides see-through capability and prevents diffusion of room contaminants into the gas stream.

Spent purifier tubes are easily replaced. Simply unscrew the end assembly from the tube holder and replace it with a new purifier tube. The design prevents room air from entering the new tube during installation (protective foil covers on each end are only pierced as the end assembly is screwed back onto the tube holder to complete installation).

Note: This item requires a purifier tube (purchased separately).
Other Notes【其他说明】
Specifications:
  • The OMI-2 tube holder is 10 in. (25.4 cm) long with a diameter of 1.5 in. (3.8 cm) and 1/8 in. fittings.
  • The OMI-4 tube holder is 16 in. (40.6 cm) long with a diameter of 1.5 in. (3.8 cm) and 1/8 in. fittings.
Legal Information【法律信息】
OMI is a registered trademark of sigma-aldrich Co. LLC
广州伟伯科技有限公司 版权所有 CopyRight ©2006-2024, All Rights Reserved
工信部备案号:粤ICP备08114744号   Page Run Time: 0.0065