您的位置：首页 > 产品中心 > LiChrosorb® RP-8 (5 μm) LiChroCART® 250-4
LiChrosorb® RP-8 (5 μm) LiChroCART® 250-4
产品性质
| material【物料】 | stainless steel column |
| Quality Level【质量水平】 | 100 |
| agency | suitable for USP L7 |
| product line【产品线】 | LiChrosorb® |
| feature【特点】 | endcapped: no |
| parameter【参数】 | 250 bar pressure 60 ℃ max. temp. |
| technique(s) | HPLC: suitable mass spectrometry (MS): suitable (Low) |
| column L × I.D.【色谱柱长度 × 内径】 | 25 cm × 4 mm |
| matrix【基质】 | fully porous particle |
| matrix active group【基质活性基团】 | C8 bonding phase |
| Particle size【粒径】 | 5 μm |
| pore size【孔径】 | 100 Å pore size |
| operating pH range【操作pH范围】 | 2 - 7.5 |
| separation technique【分离技术】 | reversed phase |
| storage temp.【储存温度】 | no temp limit |
基本信息
| General description【一般描述】 | HPLC cartridge LiChrosorb® RP-8 is a reliable irregular shaped silica gel carriers with reversed phase properties. It is well suited for the separation of neutral, acidic and weak basic compounds. This sorbent is packed into a LiChroCART |
| Analysis Note【分析说明】 | Pressure: ≤ 80 bar Theoretical Plates (N/m) (toluene): ≥ 50000 Symmetry (toluene): 0.8 - 1.4 Capacity factor (toluene): 0.5 - 1.5 |
| Legal Information【法律信息】 | LICHROCART is a registered trademark of Merck KGaA, Darmstadt, Germany LiChrosorb is a registered trademark of Merck KGaA, Darmstadt, Germany |
