Millipak^® Gold过滤器

33050190

Millipak^® Gold 0.22 μm sterile filter is a lab water consumable made up of PES (polyethersulfone) that is exclusively designed to remove particulates and bacteria from purified water. Here, the water is purified by filtering through a 0.22 μm sterilizing-grade membrane.
The membrane in the Millipak^® filter consists of conical pores that allow the water to filter at a higher flow rate with low differential pressure. The filter is heat-sealed on SAN (styrene-acrylonitrile) housing material. The housing material, along with the membrane and the production processes are carefully chosen to reduce organic and inorganic extractable release.
Millipak^® Gold 0.22 μm sterile filter is suitable for use with Milli-Q^® IQ 7000, Milli-Q^® IQ 7003/05/10/15, Milli-Q^® IX 7003/05/10/15 and Milli-Q^® EQ water purification systems.

Millipak^® Gold 0.22 μm sterile filter when fed with Milli-Q^® purified water is used in a variety of laboratory applications including cell culture and microbiology.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes and is a device that meets requirements under FIFRA. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

E-POD is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

polyethersulfone filter

sterile

hydrophilic

pkg of 1 unit

Millipak^®

1/4 in.

0.22 μm pore size

outlet stepped hose barb (with bell)

for use with Milli-Q^® EQ 7000
for use with Milli-Q^® IX 7003
for use with Milli-Q^® IX 7005
for use with Milli-Q^® IX 7010
for use with Milli-Q^® IX 7015
for use with Milli-Q^® IQ 7000
for use with Milli-Q^® IQ 7003
for use with Milli-Q^® IQ 7005
for use with Milli-Q^® IQ 7010
for use with Milli-Q^® IQ 7015

ambient

11 - Combustible Solids