您的位置：首页 > 产品中心 > Clarisolve
Clarisolve
Clarisolve® Depth Filters
产品别名
Clarisolve
Clarisolve® Depth Filters
Clarisolve 20 μm Lab Scale Depth Filters, 0.014 m2 (0.15 ft2)
Clarisolve深层过滤器
基本信息
| eCl@ss | 32031690 |
| NACRES | NB.24 |
| General description【一般描述】 | 设备配置：实验室规模Pod |
| Application【应用】 | 高密度细胞培养 |
| Specifications【产品规格】 | 过滤器级别：20MS |
| Preparation Note【制备说明】 | 灭菌方法 在2次123 °C，60分钟高压灭菌循环后仍保持完整性。 |
| Analysis Note【分析说明】 | 总有机碳(TOC)残留量：高压灭菌后(1个周期，123 °C，60分钟 )，以600 LMH的流量冲洗纯水，冲洗10分钟。冲洗结束时，抽取样品以获得TOC典型值。 |
| Legal Information【法律信息】 | CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany |
产品性质
| Quality Level【质量水平】 | 400 |
| material【物料】 | Millistak+® media TPE seal polypropylene |
| manufacturer/tradename | Clarisolve® |
| parameter【参数】 | 2.1 bar max. differential pressure (30 psid) at 37 ℃ (Forward) 2.1 bar max. differential pressure (30 psid) at 37 ℃ (Maximum) 2.1 bar max. differential pressure (30 psid) at 37 ℃ (Reverse) 2.1 bar max. differential pressure (30 psid) at 4 ℃ (Forward) |
| H【高度】 | 14 cm (5.3 in.) |
| L【长度】 | 22 cm (8.5 in.) |
| W【宽度】 | 7.4 cm (2.9 in.) |
| filtration area【过滤面积】 | 0.014 m2 |
| impurities【杂质】 | <0.25 EU/mL (LAL test, Aqueous extraction; on filter media only) |
| total organic carbon (TOC) residue | 1.4-2.1 μg/L |
| input | sample type liquid |
| conductivity【电导率】 | 0.80 – 1.59 μS/cm (product water; post autoclave (1 cycle of 60 minutes at 123 ℃) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.) |
| shipped in【运输】 | ambient |
安全信息
| Storage Class Code【储存分类代码】 | 13 - Non Combustible Solids |
| WGK | nwg |
