广州伟伯科技有限公司
您的位置:首页 > 产品中心 > Opticap® XL2 Durapore®
产品搜索:

Opticap® XL2 Durapore®

产品编号:4081606
规格:sterile, inlet connection diam. 9/16 in., pore size 0.22 μm, cartridge nominal length 2 in. (5 cm)
包装规格:3 EA
产品类别:进口试剂
品牌:Millipore
优惠价:立即咨询
产品价格
产品编号包装单位单价(元)国内现货国外库存询价单
40816063 EA3640
产品别名

Opticap® XL2 Durapore®

Opticap XL2 Durapore 0.22 μm 9/16 in. HB/HB

产品性质
Quality Level【质量水平】
400
material【物料】
PVDF
polypropylene
polypropylene housing
polypropylene support
polypropylene vent cap
silicone seal
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility【无菌性】
sterile
product line【产品线】
EMPROVE® Filter
feature【特点】
hydrophilic
manufacturer/tradename
Opticap®
parameter【参数】
1.0 bar max. differential pressure (15 psid) at 80 ℃ (Forward)
1.0 bar max. inlet pressure (15 psi) at 80 ℃
2.8 bar max. inlet pressure (40 psi) at 60 ℃
25 ℃ max. inlet temp.
3.4 bar max. differential pressure (50 psid) at 25 ℃ (Reverse; intermittent)
5.5 bar max. differential pressure (80 psid) at 25 ℃ (Forward)
5.5 bar max. inlet pressure (80 psi) at 23 ℃
80 psig max. inlet pressure
L【长度】
14.0 cm (5.5 in.)
cartridge nominal length
2 in. (5 cm)
diam.【直径】
12.5 cm (4.9 in.)
filtration area【过滤面积】
0.09 m2
inlet connection diam.
9/16 in.
inlet to outlet W
14.0 cm (5.5 in.)
outlet connection diam.
9/16 in.
overall size【总尺寸】
2 in.
impurities【杂质】
≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
gravimetric extractables
≤10 mg/capsule
matrix【基质】
Durapore®
pore size【孔径】
0.22 μm nominal pore size
0.22 μm pore size
input
sample type liquid
bubble point
≥3450 mbar (50 psig), air with water at 23 ℃
fitting【配件】
1/4 in. drain/vent hose barb (with double O-ring Seal)
inlet hose barb
14 mm (9/16 in.) inlet/outlet hose barb
outlet hose barb
packaging【包装】
Double Easy-Open bag
基本信息
General description【一般描述】
Device Configuration: 取样皿滤膜
Other Notes【其他说明】
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Linkage【联系】
Replaces: KVGL04HB3
Preparation Note【制备说明】
Sterilization Method
3 autoclave cycles of 60 min @ 126 °C; not in-line steam sterilizable
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
Analysis Note【分析说明】
Gravimetric Extractables: after 24 hours in water at controlled room temperature
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL
Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
Legal Information【法律信息】
ASTM is a registered trademark of American Society for Testing and Materials
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
产品说明
Disclaimer【免责声明】
EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
广州伟伯科技有限公司 版权所有 CopyRight ©2006-2024, All Rights Reserved
工信部备案号:粤ICP备08114744号   Page Run Time: 0.0074