Optiscale^® Capsule Filter Millipore Express^® SHC

32031690

Device Configuration: 取样皿滤膜

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

• Organism Retention: Bacterial
• Mode of Action: Filtration (size exclusion)
• Application: Protein purification
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Sterilization Method
3 autoclave cycles of 60 min @ 126 °C

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTISCALE is a registered trademark of Merck KGaA, Darmstadt, Germany

400

PVDF vent cap
fluoroelastomer FKM seal
polycarbonate
polyethersulfone
polypropylene support

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

hydrophilic

Millipore Express^®

25 ℃ max. inlet temp.
5.5 bar max. inlet pressure (80 psi) at 25 ℃
80 psig max. inlet pressure

9.4 cm (3.70 in.)

3.70 in. (94 mm)

6.9 cm (2.7 in.)

17.7 cm²

1/4 in.

1/4 in.

Millipore Express^® SHC

0.5/0.2 μm pore size

≥4000 mbar (58 psig), air with water at 23 ℃

inlet hose barb
6 mm (1/4 in.) inlet/outlet hose barb
outlet hose barb